Parallel strand lumber
Engineered wood products and an introduction to timber structural systems, published by the Structural Timber Association, defines parallel strand lumber (PSL) as: ‘…a structural member made by cutting long thin strands (typically 3.2mm thick, 20mm wide and up to 3.0m long) from timber veneers. The strands are oriented so that they are essentially parallel to the longitudinal axis of the section before being coated with adhesive and fed into a continuous press and microwave-cured. PSL is used in similar applications to LVL (laminated veneer lumber).’
[edit] Related articles on Designing Buildings
Featured articles
Check out some of the best features and news from Designing Buildings as well as key stories from around the web.
Dutyholder responsibilities from 1 July 2026.
Where performance meets practice
The Building Envelope Stage at UKCW Birmingham.
CIAT publishes briefing on planning reforms.
Leaders in Learning for Practice Network
Call for conservation leaders in learning to register interest in new network.
The importance of early engagement
Construction lessons from the Trillium HealthWorks Experience Centre.
Mayors are to be given planning call in powers
Mayors across England will be able to make the most important planning decisions.
The Master Builder: William Butterfield and his times. Book review.
Why construction can't afford to ignore the skills gap.
Building Safety Regulator, 19 August
Gill Kernick appointed Independent Chair of Residents’ Panel.
Connecting knowledge, technology and conservation
Building competence for the future of built heritage.
Building Regulations and Building Safety Act
CIOB publishes free advice for non-domestic clients.
Building Safety Newsletter from MHCLG.